-14%
Power Acoustik 15" Subwoofer Die-Cast 3800W Dual 4 Ohm BAMF Series BAMF-154
Click to enlarge

Power Acoustik 15" Subwoofer Die-Cast 3800W Dual 4 Ohm BAMF Series BAMF-154 Power Acoustik 15" Subwoofer Die-Cast 3800W Dual 4 Ohm BAMF Series BAMF-154

$179.95 $209.95

Power Acoustik 15" Subwoofer 4 Ohm BAMF Series BAMF-154

BAMF Series subwoofers deliver! This 3,800-Watt BAMF Series 15 "Dual 2ohm Subwoofer from Power Acoustik is built to survive. It has an overcompensating motor structure for increased magnetic strength, 12mm T-yoke & top plate improve low-frequency dynamics, vented T-yoke & frame reduce voice-coil heat buildup and a nonmagnetic no resonant die-cast aluminum frame. It also has a 3 "four-layer voice coil with direct-connect wire and high-temperature-tolerant adhesives. No transfer spruce pulp cone with UV & chemical protection, stitched & glued surround/cone joints and extended-excursion polyether foam surround with UV protection and dual poly-cotton suspension dampen violent accelerations. The stitched voice-coil leads prevent potential damage as well.

Features

• Overcompensating Motor Structure for Increased Magnetic Strength
• 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics
• Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up
• Non-Magnetic Non-Resonate Die-Cast Aluminum Frame
• 3” 4-Layer Voice Coil w/ Direct Connect Wire Increases Power Handling
• High-Temperature Tolerance Adhesives Resist Thermal Failure
• Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection
• Stitched and Glued Surround/Cone Joints for Strongest Bonding
• Extended Excursion Polyether Foam Surround w/ UV Protection
• Dual Poly-Cotton Suspension Dampen Violent Accelerations
• Stitched Voice Coil Leads Prevent Potential Damage
• 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included

Specification

• Max Power Handling 3,800 Watts
• RMS Power Handling 1,900 Watts
• Efficiency (1w/1m) 86.40
• Voice Coil Configuration 3″ Dual 4Ω
• Motor Volume 272 oz
• Mounting Depth 8.00″
• Optimum Sealed Enclosure ft3 2.00
• Optimum Ported Enclosure ft3 4.00

Power Acoustik 15" Subwoofer 4 Ohm BAMF Series BAMF-154

BAMF Series subwoofers deliver! This 3,800-Watt BAMF Series 15 "Dual 2ohm Subwoofer from Power Acoustik is built to survive. It has an overcompensating motor structure for increased magnetic strength, 12mm T-yoke & top plate improve low-frequency dynamics, vented T-yoke & frame reduce voice-coil heat buildup and a nonmagnetic no resonant die-cast aluminum frame. It also has a 3 "four-layer voice coil with direct-connect wire and high-temperature-tolerant adhesives. No transfer spruce pulp cone with UV & chemical protection, stitched & glued surround/cone joints and extended-excursion polyether foam surround with UV protection and dual poly-cotton suspension dampen violent accelerations. The stitched voice-coil leads prevent potential damage as well.

Features

• Overcompensating Motor Structure for Increased Magnetic Strength
• 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics
• Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up
• Non-Magnetic Non-Resonate Die-Cast Aluminum Frame
• 3” 4-Layer Voice Coil w/ Direct Connect Wire Increases Power Handling
• High-Temperature Tolerance Adhesives Resist Thermal Failure
• Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection
• Stitched and Glued Surround/Cone Joints for Strongest Bonding
• Extended Excursion Polyether Foam Surround w/ UV Protection
• Dual Poly-Cotton Suspension Dampen Violent Accelerations
• Stitched Voice Coil Leads Prevent Potential Damage
• 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included

Specification

• Max Power Handling 3,800 Watts
• RMS Power Handling 1,900 Watts
• Efficiency (1w/1m) 86.40
• Voice Coil Configuration 3″ Dual 4Ω
• Motor Volume 272 oz
• Mounting Depth 8.00″
• Optimum Sealed Enclosure ft3 2.00
• Optimum Ported Enclosure ft3 4.00