-7%
Alphasonik Monoblock Amplifier 1600 Watts Class A/B Amp Neuron Series NA1600.1AB
Click to enlarge

Alphasonik Monoblock Amplifier 1600 Watts Class A/B Amp Neuron Series NA1600.1AB Alphasonik Monoblock Amplifier 1600 Watts Class A/B Amp Neuron Series NA1600.1AB

$129.95 $139.95

Alphasonik Monoblock Amplifier 2 Ohm A/B Class NA1600.1AB

The NEURON Series of Amplifiers from Alphasonik will leave you astonished when you experience the power deliverance of these amplifiers and leave you in a conundrum on how it's even possible to achieve the power vs the almighty dollar. Not only did we accomplish the power that is needed and desired, but we didn't leave out any of the bells & whistles either. Things like 4-way protection circuitry and RCA throughputs to add more amplifiers.

Features

• Nickel-plated terminal blocks have been used on the NEURON series amplifiers. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. 
• Extruded Heat Sink
• Keeping the amplifier cool increases the efficiency to an amplifier. To keep an amplifier cool is a combination of several things, but the most important two are power output and heatsink size. 
• The external bass controller will allow you to adjust the bass level remotely without having to retune the amplifier.
• RMS 4 Ohms: 800 Watts x 1
• RMS 2 Ohm: 1600 Watts x 1
• Terminal: Nickel Plated
• Input Signal: Low Level & High-Level Inputs
• Output Signal: No
• Remote Bass Knob: Yes
• Amplifier Protection: Thermal, Short Circuit, Overload and DC Offset
• Low Pass Crossover: 50 Hz - 250Hz
• Variable Input Sensitivity: 200mV - 6V
• Frequency Response: 10Hz - 250Hz
• Bass Boost: 0 - 12dB
• S/N Ratio: >90dB (+/-3dB)
• Fuse Rating: ATC 30A x 2

Alphasonik Monoblock Amplifier 2 Ohm A/B Class NA1600.1AB

The NEURON Series of Amplifiers from Alphasonik will leave you astonished when you experience the power deliverance of these amplifiers and leave you in a conundrum on how it's even possible to achieve the power vs the almighty dollar. Not only did we accomplish the power that is needed and desired, but we didn't leave out any of the bells & whistles either. Things like 4-way protection circuitry and RCA throughputs to add more amplifiers.

Features

• Nickel-plated terminal blocks have been used on the NEURON series amplifiers. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. 
• Extruded Heat Sink
• Keeping the amplifier cool increases the efficiency to an amplifier. To keep an amplifier cool is a combination of several things, but the most important two are power output and heatsink size. 
• The external bass controller will allow you to adjust the bass level remotely without having to retune the amplifier.
• RMS 4 Ohms: 800 Watts x 1
• RMS 2 Ohm: 1600 Watts x 1
• Terminal: Nickel Plated
• Input Signal: Low Level & High-Level Inputs
• Output Signal: No
• Remote Bass Knob: Yes
• Amplifier Protection: Thermal, Short Circuit, Overload and DC Offset
• Low Pass Crossover: 50 Hz - 250Hz
• Variable Input Sensitivity: 200mV - 6V
• Frequency Response: 10Hz - 250Hz
• Bass Boost: 0 - 12dB
• S/N Ratio: >90dB (+/-3dB)
• Fuse Rating: ATC 30A x 2