-6%
DS18 1" Compression Driver with PRO-H44 Black Horn 240 Watts 8 Ohm PRO-DR1PK44
Click to enlarge

DS18 1" Compression Driver with PRO-H44 Black Horn 240 Watts 8 Ohm PRO-DR1PK44 DS18 1" Compression Driver with PRO-H44 Black Horn 240 Watts 8 Ohm PRO-DR1PK44

$27.95 $29.95

DS18 1" Screw Down Compression Driver with 1 " Phenolic Voice Coil PRO-DR1PK44

DS18's PRO-DR1PK44 has an all-new design and has been tweaked for maximum performance and loudness. This horn driver sports a 1" 8-ohms CCA voice coil to absorb the 240w Peak power and is designed to make it loud with efficiency. This driver comes with an attached square-shaped screw-on throat that makes it very versatile while also enhancing acoustics and decibel levels. It has a 107.3 dB sensitivity so the potential of high-quality loudness is easily obtainable with the right combination of power. The frequency range is very wide starting at 800 Hz up to eardrum-shattering 20 KHz!

Features

• Utilizes a CCA 1" voice coil to maximize loudness per watt.
• 240w Peak power and 120w Program power will make these complement your entire system
• Mounting depth of only 4.56 which gives them extreme mounting versatility.
• Removable voice coil so if you happen to need to repair on the go, it can be done in minutes.
• Wide frequency response of 800Hz to 20KHz so you won't miss one high-hat or cymbal crash.
• Throat Diameter 1"
• Horn Diameter 3.14 x 3.14"
• Horn Depth 2.36"
• Installation Type Screw Down
• Nominal Impedance 8 Ohms
• Peak Power Handling 240W
• Program Power Handling 120W
• AES Power Handling 60W
• Sensitivity with Horn (1w/1m) 107.3dB
• Frequency Response 800Hz - 20KHz
• Recommended HI Pass Crossover 900Hz

Motor

• Voice Coil Diameter 1"
• Voice Coil Former Material Kapton
• Winding Material CCA
• Diaphragm Material Phenolic
• Magnet Material Ferrite
• Magnet Weight 0.38 oz

Measurements

• Overall Diameter 4.52"
• Overall Depth 4.88"
• Bolt Pattern 3.95"
• Mounting Depth 4.56"
• Mounting Hole 3.26" x 3.26"

DS18 1" Screw Down Compression Driver with 1 " Phenolic Voice Coil PRO-DR1PK44

DS18's PRO-DR1PK44 has an all-new design and has been tweaked for maximum performance and loudness. This horn driver sports a 1" 8-ohms CCA voice coil to absorb the 240w Peak power and is designed to make it loud with efficiency. This driver comes with an attached square-shaped screw-on throat that makes it very versatile while also enhancing acoustics and decibel levels. It has a 107.3 dB sensitivity so the potential of high-quality loudness is easily obtainable with the right combination of power. The frequency range is very wide starting at 800 Hz up to eardrum-shattering 20 KHz!

Features

• Utilizes a CCA 1" voice coil to maximize loudness per watt.
• 240w Peak power and 120w Program power will make these complement your entire system
• Mounting depth of only 4.56 which gives them extreme mounting versatility.
• Removable voice coil so if you happen to need to repair on the go, it can be done in minutes.
• Wide frequency response of 800Hz to 20KHz so you won't miss one high-hat or cymbal crash.
• Throat Diameter 1"
• Horn Diameter 3.14 x 3.14"
• Horn Depth 2.36"
• Installation Type Screw Down
• Nominal Impedance 8 Ohms
• Peak Power Handling 240W
• Program Power Handling 120W
• AES Power Handling 60W
• Sensitivity with Horn (1w/1m) 107.3dB
• Frequency Response 800Hz - 20KHz
• Recommended HI Pass Crossover 900Hz

Motor

• Voice Coil Diameter 1"
• Voice Coil Former Material Kapton
• Winding Material CCA
• Diaphragm Material Phenolic
• Magnet Material Ferrite
• Magnet Weight 0.38 oz

Measurements

• Overall Diameter 4.52"
• Overall Depth 4.88"
• Bolt Pattern 3.95"
• Mounting Depth 4.56"
• Mounting Hole 3.26" x 3.26"