-30%
DS18 Complete Speaker Package 6.5" Speaker Set 8" Sub Tweeters Crossover Amp SQ4
Click to enlarge

DS18 Complete Speaker Package 6.5" Speaker Set 8" Sub Tweeters Crossover Amp SQ4 DS18 Complete Speaker Package 6.5" Speaker Set 8" Sub Tweeters Crossover Amp SQ4

$699.95 $999.95

Component Set / Subwoofer / Tweeters / Crossovers / Wiring Kit / Amplifier

This is a complete package for upgrading your sound system in your vehicle.  This package includes SQCOMP and SQCOAX Speakers, SQBASS 8" Subwoofer, SQTW Tweeters, Crossovers, CANDY-X4W and Wiring Kit.  See specifications below for more information.

CANDY-X4W Amplifier:

• RMS Power @ 14.4V DC
• Power @ 4 Ohms: 4 x 80 Watts
• Power @ 2 Ohms: 4 x 120 Watts
• Bridged Power @ 4 Ohms: 2 x 240 Watts
• Min. Speaker Impedance: 2 Ohm
• THD Distorotion: 0.01%
• Frequency Response: 20Hz~20KHz
• Input Sensitivity: 0.2V~+6V
• Input Impedance: 10K
• Signal to Noise Ratio: 100dB
• Channel Separation: 50dB
• Crossover Network
• High Pass Filter: 40Hz~250HZ
• Low Pass Filter: 40 Hz~250 Hz
• Bass Boost: 0dB ~+12dB
• Fuse Rating: 2 x 25A
• Size (LxWxH) 233.4mm x 127mm x 44mm
• Size (LxWxH) Inches: 9.19" x 5" x 1.73"

SQBass Amplified Subwoofer:

• 8" Slim Amplified Subwoofer 2 Ohms
• RMS Power @ 14.4V DC
• 2 Ohm: 1 x 150 Watts
• THD%: <0.5%
• Signal-to-Noise Ratio: >80dB
• Frequency Response: 20Hz-150Hz
• Input Sensitivity, High Level: 300mV-10V
• Input Sensitivity, Low Level: 100mV-3.5V
• Low Pass Filter: 50-150Hz
• Bass Boost: 0 to +12dB
• Subsonic Filter: 20Hz
• Fuse Rating: 25A

• Dimensions: LxWxH (290mm x 245mm x 77mm)
• Inches: LxWxH (11.42" x 9.65" x 3.03")

SQCOMP Speakers

• 6.5" Component Speaker 4 Ohm
• RMS Power: 60 Watts
• Max Power: 180 Watts
• Sensitivity: 91dB
• Frequency Response: 45Hz-20KHz
• Magnet: NdFeB (Woofer: N35/ Tweeter: N35)
• Cone: Woofer: Polymerization Resin + High Foam Edge/ Tweeter: Silk Film Dome
• Voice Coil: Woofer: ø30mm/Tweeter: ø28mm
• Cone Stand Structure: Integrated Structure
• Mounting Depth: 65mm (2.56")
• Mounting Diameter: 135mm (5.31")

SQCOAX

• 6.5” Coaxial Speaker 4Ω
• Mode of Frequency Division: 2-Way
• RMS Power: 60 Watts
• MAX Power: 180 Watts
• Sensitivity: 91dB
• Frequency Response: 45Hz – 20KHz
• Magnet: NdFeB (Woofer: N38 / Tweeter: N35) 
• Cone: Woofer: Bulletproof Fabric + Rubber Edge
• Tweeter: Silk Film Dome
• Voice Coil: Woofer: Φ30mm • Tweeter: Φ20mm
• Cone Stand Structure: Integrated Structure
• Mounting Depth: 69mm
• Mounting Diameter: 135mm

Tweeter Specifications:

• Nominal Impedance: 4 Ohm
• RMS Power: 40 Watts
• Max Power: 120 Watts
• Sensitivity: 88dB
• Frequency: 2K-20KHz
• Voice Coil Diameter: 28mm / 1.10"
• Voice Coil Former Material: ASV
• Diaphragm Material: Silk Dome
• Basket material: Plastic
• Magnet Material: Neodymium N35
• Built in Attenuation Switch: (+2, 0, -2)dB

Crossover Specifications:

• Tweeter Crossover
• Frequency Crossover: 3.5KHz
• dB/OCT Crossover: 12dB 
• Woofer Crossover
• Frequency Crossover: 3.5KHz
• dB/OCT Crossover: 6dB

Wire Kit Specifications:

• Tweeter (2 PCS) - 16 GA OFC - 3M Long (9.84')
• Amplifier (2PCS) - 16 GA OFC - 4 M Long (13.12')
• Remote (1 PC) - 18 GA OFC - 5M Long (16.4')
• Negative/Ground (1 PC) - 4 GA OFC - .6M Long (1.96')
• Negative/Battery Back (1PC) - 4 GA OFC - .3M Long (.98')
• High Input (2PC) - 4 GA OFC - 1.5M Long (4.92')
• Positive/Power (1PC) - 4 GA OFC - .5 M Long (1.64')
• Positive/Power (1PC) - 4 GA OFC - 2.5 M Long (8.2')
• Positive/Power (1PC) - 4 GA OFC - 3.78M Long (12.4')
• Midrange Woofer (2PC) - 16 GA OFC - .5M Long (1.64')
• Fuse Box (1PC)
• RCA (1PC) - 6 Feet 2-Way
• RCA (1PC) - 12" 4-Channel

Component Set / Subwoofer / Tweeters / Crossovers / Wiring Kit / Amplifier

This is a complete package for upgrading your sound system in your vehicle.  This package includes SQCOMP and SQCOAX Speakers, SQBASS 8" Subwoofer, SQTW Tweeters, Crossovers, CANDY-X4W and Wiring Kit.  See specifications below for more information.

CANDY-X4W Amplifier:

• RMS Power @ 14.4V DC
• Power @ 4 Ohms: 4 x 80 Watts
• Power @ 2 Ohms: 4 x 120 Watts
• Bridged Power @ 4 Ohms: 2 x 240 Watts
• Min. Speaker Impedance: 2 Ohm
• THD Distorotion: 0.01%
• Frequency Response: 20Hz~20KHz
• Input Sensitivity: 0.2V~+6V
• Input Impedance: 10K
• Signal to Noise Ratio: 100dB
• Channel Separation: 50dB
• Crossover Network
• High Pass Filter: 40Hz~250HZ
• Low Pass Filter: 40 Hz~250 Hz
• Bass Boost: 0dB ~+12dB
• Fuse Rating: 2 x 25A
• Size (LxWxH) 233.4mm x 127mm x 44mm
• Size (LxWxH) Inches: 9.19" x 5" x 1.73"

SQBass Amplified Subwoofer:

• 8" Slim Amplified Subwoofer 2 Ohms
• RMS Power @ 14.4V DC
• 2 Ohm: 1 x 150 Watts
• THD%: <0.5%
• Signal-to-Noise Ratio: >80dB
• Frequency Response: 20Hz-150Hz
• Input Sensitivity, High Level: 300mV-10V
• Input Sensitivity, Low Level: 100mV-3.5V
• Low Pass Filter: 50-150Hz
• Bass Boost: 0 to +12dB
• Subsonic Filter: 20Hz
• Fuse Rating: 25A

• Dimensions: LxWxH (290mm x 245mm x 77mm)
• Inches: LxWxH (11.42" x 9.65" x 3.03")

SQCOMP Speakers

• 6.5" Component Speaker 4 Ohm
• RMS Power: 60 Watts
• Max Power: 180 Watts
• Sensitivity: 91dB
• Frequency Response: 45Hz-20KHz
• Magnet: NdFeB (Woofer: N35/ Tweeter: N35)
• Cone: Woofer: Polymerization Resin + High Foam Edge/ Tweeter: Silk Film Dome
• Voice Coil: Woofer: ø30mm/Tweeter: ø28mm
• Cone Stand Structure: Integrated Structure
• Mounting Depth: 65mm (2.56")
• Mounting Diameter: 135mm (5.31")

SQCOAX

• 6.5” Coaxial Speaker 4Ω
• Mode of Frequency Division: 2-Way
• RMS Power: 60 Watts
• MAX Power: 180 Watts
• Sensitivity: 91dB
• Frequency Response: 45Hz – 20KHz
• Magnet: NdFeB (Woofer: N38 / Tweeter: N35) 
• Cone: Woofer: Bulletproof Fabric + Rubber Edge
• Tweeter: Silk Film Dome
• Voice Coil: Woofer: Φ30mm • Tweeter: Φ20mm
• Cone Stand Structure: Integrated Structure
• Mounting Depth: 69mm
• Mounting Diameter: 135mm

Tweeter Specifications:

• Nominal Impedance: 4 Ohm
• RMS Power: 40 Watts
• Max Power: 120 Watts
• Sensitivity: 88dB
• Frequency: 2K-20KHz
• Voice Coil Diameter: 28mm / 1.10"
• Voice Coil Former Material: ASV
• Diaphragm Material: Silk Dome
• Basket material: Plastic
• Magnet Material: Neodymium N35
• Built in Attenuation Switch: (+2, 0, -2)dB

Crossover Specifications:

• Tweeter Crossover
• Frequency Crossover: 3.5KHz
• dB/OCT Crossover: 12dB 
• Woofer Crossover
• Frequency Crossover: 3.5KHz
• dB/OCT Crossover: 6dB

Wire Kit Specifications:

• Tweeter (2 PCS) - 16 GA OFC - 3M Long (9.84')
• Amplifier (2PCS) - 16 GA OFC - 4 M Long (13.12')
• Remote (1 PC) - 18 GA OFC - 5M Long (16.4')
• Negative/Ground (1 PC) - 4 GA OFC - .6M Long (1.96')
• Negative/Battery Back (1PC) - 4 GA OFC - .3M Long (.98')
• High Input (2PC) - 4 GA OFC - 1.5M Long (4.92')
• Positive/Power (1PC) - 4 GA OFC - .5 M Long (1.64')
• Positive/Power (1PC) - 4 GA OFC - 2.5 M Long (8.2')
• Positive/Power (1PC) - 4 GA OFC - 3.78M Long (12.4')
• Midrange Woofer (2PC) - 16 GA OFC - .5M Long (1.64')
• Fuse Box (1PC)
• RCA (1PC) - 6 Feet 2-Way
• RCA (1PC) - 12" 4-Channel