Diamond Audio 5 Channel Digital Amplifier 2 Ohm Hx1200.5

This 5 channel amplifier is manufactured by Diamond Audio to operated at a total power of 1200 Watts Max and crafted with the best components on the market. It has a high-density aluminum alloy heat sink with a backlit logo bringing you style and longevity in a compact system. The anodized extruded aluminum heat sink provides superior thermal performance with audiophile grade high tolerance components.

Features

• RMS Power (4 Ω) 100 W X 4 / 480 X 1
• RMS Power (4 Ω) 100 W X 4 / 480 X 1
• RMS Power (2 Ω) 150 W X 4 / 800 X 1
• Bridged (mono 4 Ω) 480 W X 1 (sub output)
• Topology Class D
• Power Supply Full PWM
• Power Supply Threshold 10.0DVC – 17.0DVC
• Idle Current (0.7A)
• THD (1KHz @4Ω) 0.06%
• S-N Ratio (A-weighted @ 1W) -80dBA
• S-N Ratio (A-weighted @ 1W) -95dBA
• Input Sensitivity – Low Input Level 200mV – 5.0V
• Input Sensitivity – High Input Level N/A
• Input Impedance – Low Input Level 20 KΩ
• Impedance – High Input Level N/A
• Output Impedance 0.0297Ω
• Damping Factor (50Hz @ 4Ω) >250
• Bandwidth (-3dB) 10Hz-35kHz
• Crossover (-12 dB/ Oct) – Variable High Pass 40Hz-400Hz (-12dB Ch 1/2/3/4)
• Crossover (-12 dB/ Oct) – Variable Low Pass 40Hz-400Hz (-12dB Ch 5)
• Crossover (-12 dB/ Oct) – Variable Sub-Sonic 1-55Hz@18dBFuse Rating (ATC) 40A X 2
• Dimentions- Length x Width x Height (inches) 14.25″ x 7.67″ x 2″
• Dimentions- Length x Width x Height (mm) 362 x 195 x 51.5 mm
• Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance
• 4-Layer PCB Board with Balanced Differential Inputs
• Full Range Class D IR Chipset
• “SNAP” Capacitors used Throughout the Circuit
• Audiophile Grade High Tolerance Components
• Spring Steel FET Clips Provide a Cleaner Board Design
• Illuminated Logo / Fully Concealed Mounting
• Output Clip Indicators for Precise Set-Up
• Fine Tuned Fully Variable Crossovers and Phase Control
• Top Mounted Controls for Convenient Amplifier Adjustment

Diamond Audio 5 Channel Digital Amplifier 2 Ohm Hx1200.5

This 5 channel amplifier is manufactured by Diamond Audio to operated at a total power of 1200 Watts Max and crafted with the best components on the market. It has a high-density aluminum alloy heat sink with a backlit logo bringing you style and longevity in a compact system. The anodized extruded aluminum heat sink provides superior thermal performance with audiophile grade high tolerance components.

Features

• RMS Power (4 Ω) 100 W X 4 / 480 X 1
• RMS Power (4 Ω) 100 W X 4 / 480 X 1
• RMS Power (2 Ω) 150 W X 4 / 800 X 1
• Bridged (mono 4 Ω) 480 W X 1 (sub output)
• Topology Class D
• Power Supply Full PWM
• Power Supply Threshold 10.0DVC – 17.0DVC
• Idle Current (0.7A)
• THD (1KHz @4Ω) 0.06%
• S-N Ratio (A-weighted @ 1W) -80dBA
• S-N Ratio (A-weighted @ 1W) -95dBA
• Input Sensitivity – Low Input Level 200mV – 5.0V
• Input Sensitivity – High Input Level N/A
• Input Impedance – Low Input Level 20 KΩ
• Impedance – High Input Level N/A
• Output Impedance 0.0297Ω
• Damping Factor (50Hz @ 4Ω) >250
• Bandwidth (-3dB) 10Hz-35kHz
• Crossover (-12 dB/ Oct) – Variable High Pass 40Hz-400Hz (-12dB Ch 1/2/3/4)
• Crossover (-12 dB/ Oct) – Variable Low Pass 40Hz-400Hz (-12dB Ch 5)
• Crossover (-12 dB/ Oct) – Variable Sub-Sonic 1-55Hz@18dBFuse Rating (ATC) 40A X 2
• Dimentions- Length x Width x Height (inches) 14.25″ x 7.67″ x 2″
• Dimentions- Length x Width x Height (mm) 362 x 195 x 51.5 mm
• Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance
• 4-Layer PCB Board with Balanced Differential Inputs
• Full Range Class D IR Chipset
• “SNAP” Capacitors used Throughout the Circuit
• Audiophile Grade High Tolerance Components
• Spring Steel FET Clips Provide a Cleaner Board Design
• Illuminated Logo / Fully Concealed Mounting
• Output Clip Indicators for Precise Set-Up
• Fine Tuned Fully Variable Crossovers and Phase Control
• Top Mounted Controls for Convenient Amplifier Adjustment