PRV SPL 1" Phenolic Compression Driver with 6 x 6" Horn Combo WGP275Ph 2 Pack PRV SPL 1" Phenolic Compression Driver with 6 x 6" Horn Combo WGP275Ph 2 Pack
PRV High SPL 1" Phenolic Compression Driver with 6 x 6" Horn Combo WGP275PH
(2 Pack of PRV Audio Compression Drivers)
2 Pack of PRV Audio Compression Drivers. The WG275Ph combo is all about Mid Range vocal reproduction at low distortion. Built to last with its phenolic diaphragm and copper voice coil that is designed to produce high-quality audio for your sound system. This combo is all about high output, low distortion vocal reproduction, and is the perfect solution for use in high output PA systems. These Compression drivers have a 2" Voice coil and an RMS Power Rating of 100 Watts.
Features Per Driver:
• Exit Throat Diameter: 1” (25.4mm)
• Nominal impedance: 8 Ohms
• Power Handling (RMS): 100 Watts
• Program Power: 200 Watts
• Sensitivity 2.83V at 1m: 106 dB
• Frequency Response at -10dB: 600 – 7,000 Hz
• Voice Coil Diameter: 2″ (51 mm)
• Voice Coil Wire: Copper
• Voice Coil Former Material: Kapton
• Diaphragm Material: Phenolic Resin
• Flux Density: 1.1 T
• Magnet Material: Ferrite
Physical Specifications:
• Overall Depth: 6.53” (166 mm)
• Mounting Depth: 6.14” (156 mm)
• Overall Width: 6.17” (154.7 mm)
• Overall Height: 6.17” (154.7 mm)
PRV High SPL 1" Phenolic Compression Driver with 6 x 6" Horn Combo WGP275PH
(2 Pack of PRV Audio Compression Drivers)
2 Pack of PRV Audio Compression Drivers. The WG275Ph combo is all about Mid Range vocal reproduction at low distortion. Built to last with its phenolic diaphragm and copper voice coil that is designed to produce high-quality audio for your sound system. This combo is all about high output, low distortion vocal reproduction, and is the perfect solution for use in high output PA systems. These Compression drivers have a 2" Voice coil and an RMS Power Rating of 100 Watts.
Features Per Driver:
• Exit Throat Diameter: 1” (25.4mm)
• Nominal impedance: 8 Ohms
• Power Handling (RMS): 100 Watts
• Program Power: 200 Watts
• Sensitivity 2.83V at 1m: 106 dB
• Frequency Response at -10dB: 600 – 7,000 Hz
• Voice Coil Diameter: 2″ (51 mm)
• Voice Coil Wire: Copper
• Voice Coil Former Material: Kapton
• Diaphragm Material: Phenolic Resin
• Flux Density: 1.1 T
• Magnet Material: Ferrite
Physical Specifications:
• Overall Depth: 6.53” (166 mm)
• Mounting Depth: 6.14” (156 mm)
• Overall Width: 6.17” (154.7 mm)
• Overall Height: 6.17” (154.7 mm)