-9%
PRO-DR2 2" VC High Compression Driver Horn 800W 8 Ohm Lout Speaker Tweeter DS18
Click to enlarge

PRO-DR2 2" VC High Compression Driver Horn 800W 8 Ohm Lout Speaker Tweeter DS18 PRO-DR2 2" VC High Compression Driver Horn 800W 8 Ohm Lout Speaker Tweeter DS18

$49.95 $54.99

DS18 2" VC Compression Driver 800W Max
(Single Compression Driver)

The DS18 PRO-DR2 Titanium Compression Driver is a high-quality, high-frequency compression driver. This driver/tweeter delivers incredible sound in a heavy-duty package. With its 2" high-temperature voice coil, 38-ounce magnet, titanium diaphragm, and a max power of 800 watts, this driver will meet and exceed your expectations. This compression horn has a great frequency response of 980hz to 20KHZ, so it can play a much wider range than normal compression drivers. It comes with push terminals and surrounded by a very aesthetic red DS18 cover. 

Features

• 2 '' Compression Driver: These are the epitome of competition quality compression drivers. The titanium diaphragm, Kapton voice coil, and a ferrite magnet make these the best drivers available.
• Maximum Power Handling: With 800W maximum and 400W RMS the PRO-DR2 compression driver boasts out-of-this-world power handling for professional audio sound you'll love.
• HIGH QUALITY MAGNETS - Settle for nothing but the best with a 38 oz ferrite magnet that produces a wider range of tones and can handle enormous power at high volumes.
• 8 Ohm Impedance - This car tweeter has a 1.5 '' flat aluminum voice coil, 95 dB SPL, and an 8 ohm impedance rating that compensates for the undersized wire found in most speakers. cars. Ultimately reduces distortion so you can enjoy crisp, clear sound
• Long-Lasting, Durable Performance: This compression driver doesn't draw an excessive amount of power from your amp and ensures long-lasting performance from your rig.

Specifications:

• PRO Titanium Driver with 2" High Temperatur Kapton Voice Coil
• 38 oz. High Strength Ferrite Magnet with Red Cover
• RMS Power: 400 Watts
• Peak Power: 800 Watts
• Voice Coil: 2"
• Impedance: 8 Ohm
• Frequency Response: 500KHz-20KHz
• Sensitivity: 110dB
• Bolt Type: Screw Down

Measurements without Horn:

• Overall Diameter: 5.27" (134mm)
• Mounting Depth: 3.07" (78mm)

DS18 2" VC Compression Driver 800W Max
(Single Compression Driver)

The DS18 PRO-DR2 Titanium Compression Driver is a high-quality, high-frequency compression driver. This driver/tweeter delivers incredible sound in a heavy-duty package. With its 2" high-temperature voice coil, 38-ounce magnet, titanium diaphragm, and a max power of 800 watts, this driver will meet and exceed your expectations. This compression horn has a great frequency response of 980hz to 20KHZ, so it can play a much wider range than normal compression drivers. It comes with push terminals and surrounded by a very aesthetic red DS18 cover. 

Features

• 2 '' Compression Driver: These are the epitome of competition quality compression drivers. The titanium diaphragm, Kapton voice coil, and a ferrite magnet make these the best drivers available.
• Maximum Power Handling: With 800W maximum and 400W RMS the PRO-DR2 compression driver boasts out-of-this-world power handling for professional audio sound you'll love.
• HIGH QUALITY MAGNETS - Settle for nothing but the best with a 38 oz ferrite magnet that produces a wider range of tones and can handle enormous power at high volumes.
• 8 Ohm Impedance - This car tweeter has a 1.5 '' flat aluminum voice coil, 95 dB SPL, and an 8 ohm impedance rating that compensates for the undersized wire found in most speakers. cars. Ultimately reduces distortion so you can enjoy crisp, clear sound
• Long-Lasting, Durable Performance: This compression driver doesn't draw an excessive amount of power from your amp and ensures long-lasting performance from your rig.

Specifications:

• PRO Titanium Driver with 2" High Temperatur Kapton Voice Coil
• 38 oz. High Strength Ferrite Magnet with Red Cover
• RMS Power: 400 Watts
• Peak Power: 800 Watts
• Voice Coil: 2"
• Impedance: 8 Ohm
• Frequency Response: 500KHz-20KHz
• Sensitivity: 110dB
• Bolt Type: Screw Down

Measurements without Horn:

• Overall Diameter: 5.27" (134mm)
• Mounting Depth: 3.07" (78mm)