PRV Audio 1" Exit Phenolic Compression Driver 8 Ohm D275Ph-S

New addition to the 1” Exit Phenolic family, the D275Ph-S driver is all about Mid Range vocal reproduction at low distortion. Built to last with its phenolic diaphragm and copper voice coil, that are designed to reproduce the all-important vocal range with authority! High output mobile audio enthusiasts choose the PRV Audio D275Ph-s for extreme SPL car audio competitions in South America, while DJs use it in high SPL speaker cabinets for entertaining crowds that number in the thousands. The phenolic diaphragm is attached to a 2″ diameter copper wire with Kapton® former for a high 100 watts RMS power handling rating (when used with the recommended 500 Hz, 12 dB/octave high pass crossover).

Features

• High Temperature cooper voice coil and phenolic diaphragm for natural response
• Designed for midrange and vocals from 500 to 6,500 Hz
• Exit Throat Diameter: 1” (25.4mm)
• Nominal impedance: 8 Ohms
• Power Handling (RMS): 100 Watts
• Program Power: 200 Watts
• Sensitivity 2.83V at 1m: 107 dB
• Frequency Response at -10dB5: 500 – 6,500 Hz
• Voice Coil Diameter: 2″ (51 mm)
• Voice Coil Wire: Copper
• Voice Coil Former Material: Kapton
• Diaphragm Material: Phenolic Resin
• Flux Density: 1.1 T
• Magnet Material: Ferrite

PRV Audio 1" Exit Phenolic Compression Driver 8 Ohm D275Ph-S

New addition to the 1” Exit Phenolic family, the D275Ph-S driver is all about Mid Range vocal reproduction at low distortion. Built to last with its phenolic diaphragm and copper voice coil, that are designed to reproduce the all-important vocal range with authority! High output mobile audio enthusiasts choose the PRV Audio D275Ph-s for extreme SPL car audio competitions in South America, while DJs use it in high SPL speaker cabinets for entertaining crowds that number in the thousands. The phenolic diaphragm is attached to a 2″ diameter copper wire with Kapton® former for a high 100 watts RMS power handling rating (when used with the recommended 500 Hz, 12 dB/octave high pass crossover).

Features

• High Temperature cooper voice coil and phenolic diaphragm for natural response
• Designed for midrange and vocals from 500 to 6,500 Hz
• Exit Throat Diameter: 1” (25.4mm)
• Nominal impedance: 8 Ohms
• Power Handling (RMS): 100 Watts
• Program Power: 200 Watts
• Sensitivity 2.83V at 1m: 107 dB
• Frequency Response at -10dB5: 500 – 6,500 Hz
• Voice Coil Diameter: 2″ (51 mm)
• Voice Coil Wire: Copper
• Voice Coil Former Material: Kapton
• Diaphragm Material: Phenolic Resin
• Flux Density: 1.1 T
• Magnet Material: Ferrite