PRV Audio 1" Exit Screw-on Compression Driver 8 Ohm D270Ph-S

The latest addition to the TRIO By PRV 1” Exit phenolic family, the D270Ph-S is a new and improved compact driver that is all about high output and low distortion vocal reproduction all the way down to 500 Hz! This new driver is the perfect solution for use in high output PA and PRO audio on wheels systems. Compact driver design for easy front mount installation. Based on the design of our D250Ph-S this more compact driver was created to supply the demand in the market. The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn.

Features

• 2″ phenolic diaphragm provides extreme clarity in the critical mid or vocal range
• New and improved design based on our D250Ph-S
• Ideal driver for mid-range and vocal reinforcement
• Compact driver size is perfect for conditions where space is a concern
• Exit Throat Diameter: 1” (25.4mm)
• Nominal impedance: 8 Ohms
• Power Handling (RMS): 75 Watts
• Program Power: 150 Watts
• Sensitivity: 107.5 dB
• Frequency Response at -10dB5: 400 – 8,000 Hz
• Voice Coil Diameter: 2″ (50 mm)
• Voice Coil Wire: Copper
• Voice Coil Former Material: Kapton
• Diaphragm Material: Phenolic Resin
• Flux Density: 1.1 T
• Magnet Material: Ferrite

PRV Audio 1" Exit Screw-on Compression Driver 8 Ohm D270Ph-S

The latest addition to the TRIO By PRV 1” Exit phenolic family, the D270Ph-S is a new and improved compact driver that is all about high output and low distortion vocal reproduction all the way down to 500 Hz! This new driver is the perfect solution for use in high output PA and PRO audio on wheels systems. Compact driver design for easy front mount installation. Based on the design of our D250Ph-S this more compact driver was created to supply the demand in the market. The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn.

Features

• 2″ phenolic diaphragm provides extreme clarity in the critical mid or vocal range
• New and improved design based on our D250Ph-S
• Ideal driver for mid-range and vocal reinforcement
• Compact driver size is perfect for conditions where space is a concern
• Exit Throat Diameter: 1” (25.4mm)
• Nominal impedance: 8 Ohms
• Power Handling (RMS): 75 Watts
• Program Power: 150 Watts
• Sensitivity: 107.5 dB
• Frequency Response at -10dB5: 400 – 8,000 Hz
• Voice Coil Diameter: 2″ (50 mm)
• Voice Coil Wire: Copper
• Voice Coil Former Material: Kapton
• Diaphragm Material: Phenolic Resin
• Flux Density: 1.1 T
• Magnet Material: Ferrite