Memphis Audio 5 Channel Amplifier at 2 Ohm 1300 Watts Max VIVBELLE

The folks at Memphis Audio tip their hat to the greatest generation and their own proud heritage with this amp. Sporting a special Memphis Belle B-17 logo, the SixFive Series VIVBELLE five-channel amp drops the bomb with 75 watts RMS to each of your front and rear full-range speakers, plus up to 900 watts RMS to a subwoofer. In addition, this versatile amp features onboard digital signal processing — including high-pass, low-pass, and bandpass filtering — that give you outstanding versatility. And speaking of versatility, you can change the color of the illuminated logo — select one of the seven available colors to match your mood, whim, or vehicle's interior. The bass boost adds an extra pop to the bottom end. Speaker-level inputs and automatic turn-on circuitry allow you to connect this amp into almost any system, including ones using the factory radio. An optional wireless remote is available so you can control the bass level from your front seat.

Features

• 5-channel car amplifier
• 75 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms
• 125 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
• 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
• Max power configuration: 75 watts RMS x 2 at 4 ohms + 125 watts RMS x 2 at 2 ohms + 900 watts RMS x 1 at 1 ohm
• Class D amp technology
• Brushed anodized aluminum finish
• 7 color selectable LED logo
• Front channels: variable high- or low pass filter (10-5,000 Hz, 24 dB/octave)
• Rear channels: variable high-pass filter (10-500 Hz, 24 dB/octave), variable low-pass filter (50-5,000 Hz, 24 dB/octave), bandpass filter engages both
• Subwoofer channel: variable subsonic filter (10-80 Hz, 24 dB/octave), variable low-pass filter (50-500 Hz, 24 dB/octave), variable bass boost (0-18 dB at 45 Hz)
• Hinged magnetic cover plate conceals top-mounted controls
• 7 color selectable LED logo
• 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and this amplifier is recommended
• Dimensions: 12-7/16"W x 2-1/4"H x 8-1/4"D

Memphis Audio 5 Channel Amplifier at 2 Ohm 1300 Watts Max VIVBELLE

The folks at Memphis Audio tip their hat to the greatest generation and their own proud heritage with this amp. Sporting a special Memphis Belle B-17 logo, the SixFive Series VIVBELLE five-channel amp drops the bomb with 75 watts RMS to each of your front and rear full-range speakers, plus up to 900 watts RMS to a subwoofer. In addition, this versatile amp features onboard digital signal processing — including high-pass, low-pass, and bandpass filtering — that give you outstanding versatility. And speaking of versatility, you can change the color of the illuminated logo — select one of the seven available colors to match your mood, whim, or vehicle's interior. The bass boost adds an extra pop to the bottom end. Speaker-level inputs and automatic turn-on circuitry allow you to connect this amp into almost any system, including ones using the factory radio. An optional wireless remote is available so you can control the bass level from your front seat.

Features

• 5-channel car amplifier
• 75 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms
• 125 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
• 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
• Max power configuration: 75 watts RMS x 2 at 4 ohms + 125 watts RMS x 2 at 2 ohms + 900 watts RMS x 1 at 1 ohm
• Class D amp technology
• Brushed anodized aluminum finish
• 7 color selectable LED logo
• Front channels: variable high- or low pass filter (10-5,000 Hz, 24 dB/octave)
• Rear channels: variable high-pass filter (10-500 Hz, 24 dB/octave), variable low-pass filter (50-5,000 Hz, 24 dB/octave), bandpass filter engages both
• Subwoofer channel: variable subsonic filter (10-80 Hz, 24 dB/octave), variable low-pass filter (50-500 Hz, 24 dB/octave), variable bass boost (0-18 dB at 45 Hz)
• Hinged magnetic cover plate conceals top-mounted controls
• 7 color selectable LED logo
• 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and this amplifier is recommended
• Dimensions: 12-7/16"W x 2-1/4"H x 8-1/4"D